Free Shipping on All Orders Over 40!
Product DescriptionThe SATCO s21355 is an 8-watt T9 LED filament lamp designed as a direct energy-saving replacement for standard 60-watt incandescent tubular lamps. Built on a clear glass envelope with a nickel-plated aluminum base, it delivers 800 lumens at 3000K (soft white) with a 90+ CRI, making color rendering accurate enough for retail display cases, decorative pendants, and vanity fixtures. The E26 medium base fits standard residential and light commercial sockets. With a rated life of 15,000 hours and a wide 300-degree beam angle, this lamp covers the full perimeter spread expected from a tubular filament form factor. It is dimmable via 120-volt phase-cut (leading or trailing edge) dimmers and operates universally in any burning position.This lamp is suited for indoor and outdoor decorative applications where a tubular filament aesthetic is required. Typical installations include pendant fixtures, chandeliers, exposed-bulb sconces, vanity bars, and decorative string-light rigs operating on standard 120-volt branch circuits. The -4 degrees F to 113 degrees F operating temperature range supports year-round outdoor use in covered or enclosed fixture applications. Rated for enclosed fixtures. Not approved for use in vapor-tight fixtures.Key Features8W draws replace 60W incandescent output at 800 lumens, reducing energy draw by roughly 87 percent90+ CRI at 3000K soft white for accurate, warm color rendering300-degree beam angle replicates omnidirectional incandescent light distributionDimmable on 120V phase-cut circuits (leading and trailing edge)Rated for enclosed fixtures; suitable for indoor and outdoor installations15,000-hour rated lamp life reduces replacement frequency on hard-to-reach fixturesCompatibilityDesigned as an OEM-style retrofit for standard E26 medium-base T9 tubular lamp sockets operating on 120-volt, 60Hz circuits. Verify dimmer compatibility with phase-cut (triac) dimmers before installation. Not for use in vapor-tight fixtures.Installation NotesInstallation of this lamp does not require a licensed electrician for standard lamp replacement, but electricians and lighting contractors should confirm that any dimmer on the circuit is rated for LED phase-cut operation before commissioning. Power down the fixture and allow it to cool before relamping. Do not install in vapor-tight or wet-location fixtures not rated for this lamp type. Verify fixture operating temperature does not exceed 113 degrees F at the socket.Technical SpecificationsWattage: 8WIncandescent Equivalent: 60WLumens: 800CCT: 3000K (Soft White)CRI: 90+Voltage: 120VAmperage: 0.085APower Factor: 0.77Operating Frequency: 60HzBeam Angle: 300 degreesLamp Base: E26 MediumLamp Type: T9Finish: ClearMaterial: Glass / Nickel Plated AluminumDimmable: Yes, 120V phase-cutOperating Position: UniversalOperating Temperature: -4 degrees F to 113 degrees FRated Life: 15,000 hoursMaximum Overall Diameter (MOD): 1.18 inchesMaximum Overall Length (MOL): 7.2 inchesIndoor / Outdoor: Indoor and OutdoorRated for Enclosed Fixture: YesWarranty: 2 YearsStandard InformationBrand: SATCOManufacturer Part Number: s21355
Add Related products to weekly line up
There are no reviews yet.