Free Shipping on All Orders Over 40!
Product DescriptionThe IDEAL 46-382 is a heat shrink end cap designed to seal and protect the exposed ends of large-gauge conductors ranging from 4 AWG to 3/0 AWG. When heated, the cap shrinks tightly around the conductor end, creating a moisture-resistant seal that prevents corrosion, oxidation, and contamination at wire terminations. This type of end cap is commonly used by electricians working on power distribution, marine wiring, automotive, and industrial applications where sealed wire ends are required for long-term reliability. Installation requires a heat gun and takes only seconds per termination.The 46-382 is suited for applications where bare conductor ends must be protected from environmental exposure, including outdoor electrical runs, underground splices that require end sealing, and marine or wet-location wiring. The wide conductor range 4 AWG through 3/0 AWG makes this cap adaptable across a broad set of service entrance, feeder, and large-circuit wiring scenarios encountered in both residential and commercial electrical work.Key FeaturesAccepts conductors from 4 AWG to 3/0 AWG for broad application coverageHeat shrink construction creates a tight, moisture-resistant seal on conductor endsProtects against corrosion, oxidation, and environmental contaminationCompact and lightweight at 0.2 pounds per unitQuick installation with a standard heat gun no special tooling requiredCompatibilityDesigned as an end-sealing solution for bare conductor ends in the 4 AWG to 3/0 AWG range, suitable for use in residential, commercial, and industrial electrical installations requiring moisture protection at wire terminations.Installation NotesInstallation should be performed by a licensed electrician following applicable NEC requirements. De-energize and lock out the circuit before handling any conductors. Slide the cap fully over the conductor end and apply uniform heat with a heat gun, working from the closed end outward, until the cap conforms tightly to the wire. Do not use an open flame as a heat source, as uneven heat can damage the cap or conductor insulation.Technical SpecificationsConductor Range: 4 AWG to 3/0 AWGWeight: 0.2 poundsUPC: 78325046382Standard InformationBrand: IDEALManufacturer Part Number: 46-382
Add Related products to weekly line up
There are no reviews yet.