Free Shipping on All Orders Over 40!
Product DescriptionThe General Electric hw18hn2daa is a single-zone ductless highwall indoor unit rated at 18,000 BTU/h, operating on 208-230 volts, 60 Hz, single phase. Part of the Hotpoint series from GE Appliances, this indoor evaporator head pairs with the 1H18HN2DAA outdoor unit to form a complete mini-split heat pump system. It uses R32 refrigerant and delivers five fan speed stages plus an auto mode, reaching a minimum sound level of 31 dBA at the lowest setting. A high-power turbo mode and warm start technology allow faster heating and cooling response. The auto louver adjusts airflow direction automatically based on operating mode. Licensed HVAC technicians install and commission this unit in residential and light-commercial applications.This unit is designed for single-zone residential or small commercial highwall installations where ductless heat pump conditioning is required. It mounts to an interior wall using a supplied mounting plate and template, with two-way piping drain exits on both the right and left sides to accommodate varied installation layouts. Wi-Fi connectivity integrates with the SmartHQ App, allowing remote temperature and mode control for end users. The extended kickstand and accessible control board simplify servicing without full casing removal. All Hotpoint heat pumps, with limited regional exceptions noted in the CEE directory, carry CEE Tier-2 certification, supporting eligibility for applicable federal and state energy incentive programs.Key Features18,000 BTU/h cooling rated capacity on a single-zone R32 systemFive fan speed stages plus auto mode with a minimum 31 dBA sound levelAuto louver adjusts airflow upward for cooling and downward for heatingHigh-power turbo mode and warm start technology for faster room conditioningTwo-way piping drain on right and left sides for flexible installation routingWi-Fi enabled via SmartHQ App; CEE Tier-2 certified for incentive eligibilityCompatibilityDesigned for use exclusively with the 1H18HN2DAA outdoor unit to form a complete 18K Hotpoint single-zone ductless heat pump system.Installation NotesInstallation must be performed by a licensed HVAC technician familiar with ductless mini-split systems and local mechanical codes. Power must be disconnected at the breaker before mounting or making electrical or refrigerant connections. The liquid-line refrigerant connection is 1/4 inch O.D. and the suction line is 1/2 inch O.D.; use proper flare tools and a torque wrench per the manufacturer specification guide for line connections. R32 is a mildly flammable refrigerant classified A2L follow all applicable safety and handling procedures required by local code and the equipment manufacturer.Technical SpecificationsCooling Rated Capacity: 18,000 BTU/hVoltage/Hertz/Phase: 208-230V / 60 Hz / 1-phaseRefrigerant Type: R32Fan Speed Stages: 5 plus AutoIndoor Sound Level: 31 dBA (low) to 49 dBA (high)Liquid Line O.D.: 0.25 inchesSuction Line O.D.: 0.5 inchesOverall Width: 34.5 inchesOverall Height: 12.125 inchesOverall Depth: 8.5 inchesNet Weight: 21.83 poundsApproximate Shipping Weight: 28.22 poundsParts Warranty: Limited 5-year entire appliance; 7-year compressor; 10-year entire appliance with registrationLabor Warranty: No warrantyUnit Type: IndoorStyle: HighwallProduct Type: Single ZoneStandard InformationBrand: General ElectricManufacturer Part Number: hw18hn2daa
Add Related products to weekly line up
There are no reviews yet.