[ WOOD.KOTE ] WOOD FILLER – for smooth finishes on wood products – C112 – Cherry | 700g

Brand: WOOD.KOTE

Rated No. 1 Professional Woodfiller | The Professional Woodworker’s Choice Since 1945

Wood Filler | Grain Filler | Crack Filler | Edge Filler

Capacity: 200g | 700g

WoodKote Woodfiller unique features:

NO WASTE – Usable to the last drop.
If dries out just add water to soften.

• Won’t Shrink, Sink, Crack or Fall Out.
• Suitable for use in all Timbers including Partical Board M.D.F. (Custom Wood), Plaster Board, Flooring, Paneling etc.
• Can be used as Wood Putty, Sanding Sealer, Prime Coat. Grainfiller, Crackfiller, Undercoat & Edge Filler all in one.
• Can be tinted in wet state or overstained when dry. Use any type of Colourant i.e. Water based Spirit based ochers etc.
• Provides a strong foundation for all top coats inclc. single or two pack products polyurethanes, oils, acrylics, french polish wax etc.
• Easy sanding. Sanded dust can be mixed with water for re-use.
• Non Flammable, Non Toxic, Non Yellowing
• Takes nails, screws, planning, sawing, drilling and routing.
• Can be used on Metal, Plastic, Fibreglass and in Foundries.

Directions to Use:

• Surface should be free of finishes wax or contaminates.
• Apply with putty knife, pressing firmly into place.
• Filling deeper holes in layers of about 6mm allowing each fill to dry.
• Sanding after 15 to 20 minutes.

Available in (10 Colours):

B106 – Birch | C112 – Cherry | FM118 – Fir Maple | N126 – Nature | RO134 – Red Oak | T108 – Teak | TM04 – Naytoh | TM07 – Ramin | WH144 – White | WL142 – Walnut