Elkhart Products 9002500CB Reducer Coupling 21 in Copper Cxc

Product DescriptionThe ELKHART PRODUCTS 9002500CB is a copper reducer coupling with stop, designed for sweat-solder connections in residential and commercial plumbing systems. Sized at 2 inches x 1 inches with a C x C (copper-to-copper) connection type, this fitting is part of the KLEENFIT product line, which means it arrives pre-cleaned and bagged for immediate use without additional flux prep steps. The integral stop ensures consistent insertion depth, reducing the chance of an incomplete joint during soldering. Plumbers and pipefitters install this coupling when transitioning between two different pipe diameters within a copper water supply or distribution system.This reducer coupling is suited for potable water supply lines, hydronic heating distribution piping, and general copper plumbing installations in both residential and light commercial settings. The KLEENFIT packaging keeps the fitting free of oils and contaminants from the factory, which supports a clean, void-free solder joint. It is appropriate for use in new construction rough-in work as well as repair and retrofit applications where a diameter transition is required in a copper run.Key Features2 inches x 1 inches reducer sizing for diameter transitions in copper piping systemsC x C solder-joint connection type for standard sweat fitting installationIntegral stop ensures consistent pipe seating depth for reliable jointsKLEENFIT pre-cleaned and bagged packaging eliminates pre-installation cleaning stepsCopper construction for corrosion resistance and long service life in water systemsCompatibilityDesigned as an OEM-style replacement and standard-fitment coupling for copper pipe systems using 2-inch and 1-inch nominal pipe sizes with sweat-solder connections.Installation NotesInstallation is performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Shut off the water supply and depressurize the line before cutting and fitting. Use appropriate copper pipe flux and lead-free solder as required by potable water regulations. Allow the joint to fully cool before restoring system pressure and inspecting for leaks.Technical SpecificationsSize: 2 inches x 1 inchesConnection Type: C x C (Copper to Copper)Joint Type: Solder (Sweat)Material: CopperProduct Line: KLEENFITDimensions (L x W x H): 2.26 inches x 3.02 inches x 2.26 inchesWeight: 0.383 poundsUPC: 683264307896Standard InformationBrand: ELKHART PRODUCTSManufacturer Part Number: 9002500CB